Fale com um especialista

Item Tag: DYC

DYC 4 pack Black Emerald Metallic HyperDip Peelable Paint Spray 11oz Aerosol

Listing is (4) four pack of Gloss Emerald Metallic Black HyperDip aerosol cans.Product DescriptionHyperDip® Black Emerald Metallic is a deep, metallic Gloss Black right out of the can. No topcoats or enhancers needed.HyperDip® is the latest technology in peelable aerosol paints. HyperDip® is still peelable like Plasti Dip, however improved in every way. HyperDip® is perfect for your Wheels, Trim, Emblems, Mirrors or any small surface.You will notice the benefits of the advanced HyperDip® technology immediately:- A smoother, flatter, slicker finish- A stronger, stretchier coating- Easier to wet out and spray like a pro- Enhanced finishes and sheen right out of the can Gloss products are traditionally more difficult to spray than satin or matte. HyperDip® is not compatible with traditional Plasti Dip or any other non-HyperDip® coatings, so please do not combine or stack with any other products. Gloss HyperDip® can be applied over existing Shadow Black HyperDip® if the existing Shadow Black is in great condition. No tears, no texture, no stains. To apply Gloss HyperDip® over previously applied Shadow Black: wash the surface with soap and water, allow the surface to dry for 24 hours, wipe the surface thoroughly with PreDip Spray, then wipe the surface thoroughly with isopropyl alcohol. If all of those steps are completed, you can lay 2 wet coats of Gloss HyperDip® on top and should have great results. Q&A:How many coats do I need to lay down?You would need to start with 4 tack coats and then apply 4-5 wet coats.How long should I wait in-between coats?You want to wait 5-7 minutes between each dust coat and 15-25 minutes (depending on ambient temperature) between each wet coat. What is the difference between a tack coat and a wet coat?A tack coat is a light dust coat with minimal coverage preventing sags and runs. A wet coat is a ‘full coat’ where you lay down a lot of paint in one pass.Temperature guidelines:Ideal temps for application range from 30F – 95F, however HyperDip® is sensitive to humidity. Humidity levels at or below 50% are ideal.Test all applications in a small inconspicuous area to make sure it will meet your expectations and is suitable for each unique surface. Although HyperDip® has proven to be safe and predictable, every surface is unique and it’s impossible to predict how each surface will react. Aerosols are not designed to spray large or horizontal surfaces. Aerosols are not suitable for spraying hoods, roofs, doors, etc. Please utilize our gallons and sprayers for those surfaces.Clean each surface with PreDip Spray to remove any dirt, debris, oils, waxes, grease, or loose rust, then let dry completely before spraying HyperDip®. Coat each dipped surface with DipCoat Protective Spray 4 hours after dip has dried for best results.

DYC 4 pack Nardo Grey HyperDip Peelable Paint Spray Aerosol Cans Wheel Kit

Listing is (4) four pack of Nardo Grey HyperDip® Aerosol CansProduct DescriptionHyperDip­® Nardo Grey is a deep, rich Satin Grey right out of the can. No topcoats or enhancers needed. HyperDip® is the latest technology in peelable aerosol paints. HyperDip® is still peelable like Plasti Dip, however improved in every way. HyperDip® is perfect for your Wheels, Trim, Emblems, Mirrors or any small surface.You will notice the benefits of the advanced HyperDip® technology immediately:- A smoother, flatter, slicker finish- A stronger, stretchier coating- Easier to wet out and spray like a pro- Enhanced finishes and sheen right out of the can Q&A:How many coats do I need to lay down?You would need to start with 4 tack coats and then apply 4-5 wet coats.How long should I wait in-between coats?You want to wait 5-7 minutes between each dust coat and 15-25 minutes (depending on ambient temperature) between each wet coat. What is the difference between a tack coat and a wet coat?A tack coat is a light dust coat with minimal coverage preventing sags and runs. A wet coat is a ‘full coat’ where you lay down a lot of paint in one pass.Temperature guidelines:Ideal temps for application range from 30F – 95F, however HyperDip® is sensitive to humidity. Humidity levels at or below 50% are ideal.Test all applications in a small inconspicuous area to make sure it will meet your expectations and is suitable for each unique surface. Although HyperDip® has proven to be safe and predictable, every surface is unique and it’s impossible to predict how each surface will react. Aerosols are not designed to spray large or horizontal surfaces. Aerosols are not suitable for spraying hoods, roofs, doors, etc. Please utilize our gallons and sprayers for those surfaces.Clean each surface with PreDip Spray to remove any dirt, debris, oils, waxes, grease, or loose rust, then let dry completely before spraying HyperDip®. Coat each dipped surface with DipCoat Protective Spray 4 hours after dip has dried for best results.

DYC 4 pack Gloss Stealth Grey HyperDip Peelable Paint Spray 11oz Aerosol Cans x4

Listing is (4) four pack of Gloss Metallic Stealth Grey HyperDip aerosol cans.Product DescriptionHyperDip­® Stealth Grey is a deep, rich Glossy Metallic Grey right out of the can. No topcoats or enhancers needed.HyperDip® is the latest technology in peelable aerosol paints. HyperDip® is still peelable like Plasti Dip, however improved in every way. HyperDip® is perfect for your Wheels, Trim, Emblems, Mirrors or any small surface.You will notice the benefits of the advanced HyperDip® technology immediately:- A smoother, flatter, slicker finish- A stronger, stretchier coating- Easier to wet out and spray like a pro- Enhanced finishes and sheen right out of the can HyperDip® is not compatible with traditional Plasti Dip or any other non-HyperDip® coatings, so please do not combine or stack with any other products. Q&A:How many coats do I need to lay down?You would need to start with 4 tack coats and then apply 4-5 wet coats.How long should I wait in-between coats?You want to wait 5-7 minutes between each dust coat and 15-25 minutes (depending on ambient temperature) between each wet coat. What is the difference between a tack coat and a wet coat?A tack coat is a light dust coat with minimal coverage preventing sags and runs. A wet coat is a ‘full coat’ where you lay down a lot of paint in one pass.Temperature guidelines:Ideal temps for application range from 30F – 95F, however HyperDip® is sensitive to humidity. Humidity levels at or below 50% are ideal.Test all applications in a small inconspicuous area to make sure it will meet your expectations and is suitable for each unique surface. Although HyperDip® has proven to be safe and predictable, every surface is unique and it’s impossible to predict how each surface will react. Aerosols are not designed to spray large or horizontal surfaces. Aerosols are not suitable for spraying hoods, roofs, doors, etc. Please utilize our gallons and sprayers for those surfaces.Clean each surface with PreDip Spray to remove any dirt, debris, oils, waxes, grease, or loose rust, then let dry completely before spraying HyperDip®. Coat each dipped surface with DipCoat Protective Spray 4 hours after dip has dried for best results.

Plasti Dip DYC DipPearl TopCoat Next Gen Frozen Clear (1) Gallon

Listing is for (1) one gallon of DipPearl TopCoat Next Gen Frozen Clear Gallon. Product DescriptionFrozen Next Gen TopCoat was designed to provide a perfect and aggressive matte sheen finish. This product offers excellent leveling properties to ensure a super flat, smooth surface. Low sheen, but terrific at maintaining an surprising level of clarity. This product was designed to easily produce a beautiful stealthy finish without losing the saturation and even shifting of your metallic powders. Next Gen TopCoats are as good as it gets when looking for a medium for pearls and metallic powders – however they are also perfect as sealer coats over PDS and PS gallons. Add extra sheen, richness and protection to your Plasti Dip or Performance Series colors with Frozen or Satin Next Gen TopCoats (1-2 wet coats is ideal when used as a sealer).Next Gen TopCoats respond extremely well to DipCoat Protective Spray, which is highly recommended for every vehicle sprayed with this coating. Next Gen TopCoats are designed to be sprayed through turbine systems such as the DYC DipSprayer or Advanced DipSprayer, however they can be sprayed out of a proper HVLP gun as well. 1.8-2.0 sized tips at 16-20psi would be a good starting point, and you can adjust per your personal set up from there.Test all applications in a small inconspicuous area to make sure it will meet your expectations and is suitable for each unique surface. Although Plasti Dip has proven to be safe and predictable, every surface is unique and it’s impossible to predict how each surface will react.

Preencha seus dados e te redirecionamos para o WhatsApp da nossa equipe.

Não perca tempo (e dinheiro) com a tinta errada!

Sua indústria precisa de durabilidade e nós temos a técnica.

  • Preço direto de fábrica.
  • Consultoria técnica gratuita.
  • Qualidade ISO 9001.